Installation Tab; Preset Position - Sony Ipela SNC-ER585 User Manual

• While Video out is set to On, when you set Image 2
to On, the images set to be output from Video out are
displayed (SNC-ZP550/ZR550).
Camera Direction
Select either of Azimuth or Area title.
Azimuth
Displays the azimuth with the direction specified in
North as north.
Mode: Select between 4-azimuth or 8-azimuth displays.
Selecting Off will disable the displaying of the
azimuth.
North: Change the direction of the camera and click
Set. This will set that direction as north. Click Call
to change the direction of the camera to the direction
set as north.
Area title
Selecting an area title will display the registered string
according to the direction the camera is facing.
Here, set the display name for the area the camera is
facing. The maximum number of areas that you can
register is 64, from No.1 to No.64.
1
Enter the string to display.
2
Put a check in the checkbox.
3
Move the camera to the specified lower left area and
click Lower left.
4
Move the camera to the specified upper right area
and click Upper right.
5
Click Set.

Preset position

While this item is checked, the preset position name is
displayed when the camera moves to the preset position
you have registered.
The preset position name is displayed prior to the
azimuth and area title.
Image
Select either Image 1 or Image 2 to specify whether to
superimpose on or not, set the font size and configure
each item that display position is assigned.
Superimpose
On/Off: When using the Superimpose function, select
On.
Font size: Set the font size.
40
Configuring the System — System Menu
Superimpose format
Set the items to superimpose according to the displayed
position. English one byte characters and symbols are
displayed. Available items are as follows:
• Off: Set not to superimpose.
• Text: Set to display a string that you want. You can
enter characters in the right free space.
• Date & time: Set to display date and time.
• Camera ID: Set to display Camera ID.
• Codec: Set to display the bit rate and frame rate.
• Zoom ratio: Set to display the zoom ratio.
• Camera direction: Set to display the azimuth, area
title or name of a preset position.
• Event: Set to display an event record.
Notes
• The items except for Off and Text cannot be set at the
same time.
• Depending on the length of the string you enter in
Text, the string display may crossover the other item.
In this case, change the display position, change the
font size or modify the string.
OK/Cancel
See "Buttons common to every menu" on page 35.

Installation Tab

You can perform settings related to installation.
Display sample: SNC-EP550/ER550
Camera operating mode (SNC-EP550/
EP580/ER550/ER580/ER585/ER585H/
ZP550/ZR550)
You can switch the operating modes of the camera.
Select either 25 fps or 30 fps.
The settings of the camera operating mode are related to
the frame rate selected in the Video code tab.
When the camera operating mode is switched, the
message "This System will be rebooted. Are you sure?"
appears.
Click OK to reboot the camera, and complete the
settings.
HPoE LLDP function
Based on 802.3at, select whether to use the power
adjustment function by LLDP (Link-Layer-Discovery-
Protocol).