Accessing The Camera Using The Web Browser - Sony Ipela SNC-ER585 User Manual

4
Select Allow another program....
5
Add program.
When the above procedure is completed, the
cameras connected in the local network are
displayed in SNC toolbox.
16

Accessing the Camera Using the Web Browser

Accessing the Camera
Using the Web Browser
After the IP address has been assigned to the camera,
check that you can actually access the camera using the
Web browser installed on your computer.
Use Internet Explorer as a Web browser.
1
Start the Web browser on the computer and type the
IP address of the camera in the URL address bar.
The viewer window is displayed.
Display sample
Note
When accessing the camera, images will not be
displayed in the following conditions.
• When the maximum number of viewers exceeds 5
However, if the e-Mail (SMTP) function or the FTP
client function is set to On, the maximum number of
viewers will be 3.
• The bit rate including new requests exceeds 16Mbps
• Depending on the setup environment, video may
become unclear even when being viewed by less than
the maximum number of viewers. If this occurs,
reduce the number of viewers, lower the bit rate, or
decrease the size of the picture (SNC-ZP550/ZR550).
Using the SSL function
Note
The model on sale in China does not support the SSL
function.