Messages regarding ink
Ink insufficient. .............................................................................................................................................. 1053
No ink left. ...................................................................................................................................................... 1053
Remaining level of the ink cannot be correctly detected. .............................................................................. 1053
Close Ink Tank Cover .................................................................................................................................... 1054
Not much ink is left. ....................................................................................................................................... 1054
No ink tank loaded. ........................................................................................................................................ 1054
Wrong ink tank. .............................................................................................................................................. 1055
Ink insufficient.
The ink level is low, so you cannot print, clean the Printhead, or do other opera-
tions that require ink.
No ink left.
Cause
There is no ink left.
Remaining level of the ink cannot be correctly detected.
Ink level detection cannot work cor-
rectly if you use refill ink tanks.
iPF6350
Downloaded from ManualsPrinter.com Manuals
Cause
Open the Ink Tank Cover and replace the Ink Tank for which the Ink Lamp is flashing.
(See "Replacing Ink Tanks.")
Cause
The refill ink tank can no longer be used. See the section Ink level detection
and take the appropriate action. (See "Ink Level Detection.")
Error Message
Press ▲ or ▼ to select Rep. Ink
Tank, and then press the OK but-
ton. Replace the Ink Tank that is
low with a new Ink Tank.
(See "Replacing Ink Tanks.")
→P.964
Press ▲ or ▼ to select Continue
to print, and then press the OK
button to resume printing. Howev-
er, note that this error may affect
the printing quality.
If the printer is in Standby mode,
press the OK button and replace
the Ink Tank that is low with a new
Ink Tank.
(See "Replacing Ink Tanks.")
→P.964
Corrective Action
→P.964
Corrective Action
>
Messages regarding ink
>
Corrective Action
→P.1036
Ink insufficient.
13
1053