View Management; View As; Default Views - Kyocera TASKalfa 3051ci Operation Manual

View As

Default Views

KYOCERA Net Viewer 5.3

2 View Management

The application offers two types of views: custom views that are listed in My
Views, and standard views defined by the application that are listed in Default
Views. The default views are:
Device
General view, Capability view, Counter view, Firmware view, Asset
view, Map view
Accounting
Accounting devices view, Accounts view
Host
Host view, Host driver view, Host queue view
You can create, change, or delete views in My Views. In the Default Views, you
can customize the appearance of the lists, but the changes are not saved after
you leave the view. You cannot make permanent changes to the views in
Default Views.
You can switch to a different view by using the View as feature in the View
menu. Select the view you want to change, click View > View as, and click the
new view from the list.
If the original view is in Default Views, the view switches to the selected
default view.
If the original view is in My Views, the view itself changes to the selected
view. To save the view, click Update view.
This feature is not available for Account views or Host views.
The application provides standard views in Default Views that cannot be
removed or edited.
In any view except Map view, you can add or remove columns from the list
temporarily. Right-click on the column heading and select or clear the desired
item. The modified views are not saved when you switch to a different view.
The following default Device views are available:
General view
Displays general information, such as display name, IP address, host name,
toner level, description, location, and model name.
Capability view
Displays support for various device capabilities, such as color or black &
white, print speed, duplex, total memory, HDD/SSD (storage device), scan,
FAX, staple, punch, address book, document box, user list, and job log.
Counter view
2-1