File Management Utility; Starting The Application; Add Devices; Adding Devices - Kyocera TASKalfa 8000i User Manual

Starting the Application

1
2
3

Add Devices

Adding Devices

1
2
3
4
5
6
1-1

1 File Management Utility

The File Management Utility (FMU) distributes documents scanned on a multi-
function print system (MFP) to specified network folders or computers. The user
can set the criteria for distributing the scanned files. Advanced distribution
criteria are available for certain MFPs.
If the application is not set to start automatically, you can start it manually.
Open the application.
In the task bar, right-click on the File Management Utility icon.
In the context menu, click Open FMU.
If Open FMU is grayed out, restart File Management Utility with administrator
privileges.
Note: In Preferences, you can set the application to start automatically.
Specific MFPs on a network can be selected for use with the FMU. Use the Add
Device Wizard to select devices by IP address or host name.
You can add devices for the application with the Add Device Wizard.
In the main screen, click Add device.
In the Add Device Wizard, enter the IP address or the Host name of the MFP
to add, and then click Add to add the device to the list.
Enter another IP address or Host name if necessary.
Click Next.
If the device is enabled with authentication, for Change authenticate mode,
select Use local authentication or Use settings on the device as required.
In the Communication Settings page, specify the SNMP type, and enter the
Login user name and Password for the MFP.
User Guide