1
I/O board
2
I/O board cable
Replacing the I/O Board
1. Follow the instructions in
Before You
2. Align the connectors on the I/O board with the slots on the computer base and press the I/O board until it is seated fully.
3. Replace the middle cover (see
4. Replace the display assembly (see
5. Replace the processor fan (see
6. Connect the I/O board cable to the connector on the system board.
7. Replace the palm rest (see
8. Replace the keyboard (see
9. Follow the instructions from
10. Replace the module cover (see
11. Replace the optical drive (see
12. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the Middle
Cover).
Replacing the Display
Assembly).
Replacing the Processor
Fan).
Replacing the Palm
Rest).
Replacing the
Keyboard).
step 5
to
step 7
in
Replacing the Hard
Replacing the Module
Cover).
Replacing the Optical
Drive).
Battery).
Drive.