Replacing the Camera Module
1. Follow the instructions in
Before You
2. Connect the camera cable to the connector on the camera module.
3. Replace the tape to secure the camera cable to the camera module.
4. Use the alignment posts to place the camera module on the display cover.
5. Press down on the camera module to secure it to the display cover.
6. Replace the display panel (see
7. Replace the display bezel (see
8. Replace the display assembly (see
9. Replace the palm rest (see
10. Replace the keyboard (see
11. Replace the optical drive (see
12. Follow the instructions from
13. Replace the module cover (see
14. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the Display
Panel).
Replacing the Display
Bezel).
Replacing the Display
Assembly).
Replacing the Palm
Rest).
Replacing the
Keyboard).
Replacing the Optical
Drive).
step 5
to
step 7
in
Replacing the Hard
Replacing the Module
Cover).
Battery).
Drive.