2. Align the connector on the Bluetooth card with the connector on the system board, and press the Bluetooth card until it is fully seated.
3. Replace the screw that secures the Bluetooth card to the system board.
4. Replace the palm rest (see
5. Replace the keyboard (see
6. Replace the optical drive (see
7. Follow the instructions from
8. Replace the module cover (see
9. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Replacing the Palm
Rest).
Replacing the
Keyboard).
Replacing the Optical
Drive).
step 5
to
step 7
in
Replacing the Hard
Replacing the Module
Cover).
Battery).
Drive.