2. Place the subwoofer assembly on the computer base.
3. Replace the three screws that secure the subwoofer assembly to the computer base.
4. Connect the subwoofer cable to the connector on the system board.
5. Replace the palm rest (see
6. Replace the keyboard (see
7. Replace the optical drive (see
8. Follow the instructions from
9. Replace the module cover (see
10. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Replacing the Palm
Rest).
Replacing the
Keyboard).
Replacing the Optical
Drive).
step 5
to
step 7
in
Replacing the Hard
Replacing the Module
Cover).
Battery).
Drive.