Replacing The Power-Button Board - Dell Inspiron 17 Service Manual

Replacing the Power Button Board
1. Follow the instructions in Before You
2. Align the slots on the power button board with the alignment guides on the palm rest and carefully place the power button board.
3. Replace the two screws that secure the power button board to the palm rest.
4. Adhere the power button board cable on the palm rest.
5. Turn the palm rest over.
6. Replace the palm rest (see
7. Replace the keyboard (see
8. Replace the optical drive (see
9. Follow the instructions from
10. Replace the module cover (see
11. Replace the battery (see Replacing the
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the Palm Rest).
Replacing the Keyboard).
Replacing the Optical Drive).
step 5 to step 7 in Replacing the Hard
Replacing the Module Cover).
Battery).
Drive.