1
screws (2)
2
processor fan
3
processor fan cable connector
Replacing the Processor Fan
1. Follow the instructions in
Before You
2. Place the processor fan in the computer base.
3. Replace the two screws that secure the processor fan to the computer base.
4. Connect the processor fan cable to the connector on the system board.
5. Slide the I/O board cable into the connector on the system board and press down on the connector latch to secure the cable.
6. Replace the palm rest (see
7. Replace the keyboard (see
8. Replace the optical drive (see
9. Follow the instructions from
10. Replace the module cover (see
11. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the Palm
Rest).
Replacing the
Keyboard).
Replacing the Optical
Drive).
step 5
to
step 7
in
Replacing the Hard
Replacing the Module
Cover).
Battery).
Drive.