Removing And Replacing The Camera Module - Dell Inspiron 1420 Service Manual

Back to Contents Page
Camera Module
Dell™ Inspiron™ 1420/Dell Vostro™ 1400
Service Manual
Removing and Replacing the Camera Module
Removing and Replacing the Camera Module
CAUTION:
NOTICE:
surface, such as the back panel on the computer.
1. Follow the instructions in
2. Remove the display bezel (see
3. Lift the cable securing tab, and then gently pull the camera module cable from the connector.
4. Remove the two M2 x 3-mm screws securing camera module to the display assembly.
5. Gently lift the camera module.
6. Install the replacement camera and tighten the two M2 x 3-mm screws.
7. Insert the camera module cable in the connector and press down the securing tab.
8. Replace the display bezel (see
1 display
3 camera
Back to Contents Page
Great user manuals database on
Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Before You Begin.
Removing the Display
Replacing the Display
2 screws (2)
4 camera module
UserManuals.info
Bezel).
Bezel).