Removing The Camera Module; Replacing The Camera Module - Dell XPS L502X Service Manual

Back to Contents Page
Camera Module
Dell™ XPS™ L502X Service Manual
Removing the Camera Module
Replacing the Camera Module
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Camera Module
1. Follow the instructions in Before You
2. Remove the battery (see Removing the
3. Remove the module cover (see
4. Remove the memory module(s) (see
5. Remove the palm-rest assembly (see
6. Remove the keyboard (see
7. Remove the display assembly (see
8. Remove the display bezel (see
9. Disconnect the camera cable from the connector on the camera module.
1 camera module 2
10. Gently pry the camera module off the aluminium foil.
Replacing the Camera Module
1. Follow the instructions in Before You
2. Adhere the camera module to the aluminium foil.
Begin.
Battery).
Removing the Module Cover).
Removing the Memory Module(s)).
Removing the Palm-Rest
Removing the Keyboard).
Removing the Display Assembly).
Removing the Display Bezel).
camera cable connector
Begin.
Removing the
Assembly).
Battery) before working inside the