Remote Ap Monitoring; Arm And Channel Utilization Information - Dell PowerConnect W-Airwave Manual

Remote AP Monitoring

To monitor remote APs, follow these steps:
1. From the APs/Devices > List page, filter on the Remote Device column to find remote devices.
2. To view detailed information on the remote device, select the device name. The page illustrated in
appears.
Figure 15
3. You can also see if there are users plugged into the wired interfaces in the Connected Users list.
NOTE: This feature is only available when the remote APs are in split tunnel and tunnel modes.

ARM and Channel Utilization Information

ARM statistics and Channel utilization are very powerful tools for diagnosing capacity and other issues in your
WLAN.
1. Navigate to an APs/Devices > Monitor page for any of the following Dell PowerConnect W-Series models:
Dell PowerConnect W-AP-105, AP-92, AP-93, AP-124, AP-125, or AP-135.
2. In the Radios table, select a radio link under the Name column for a radio.
Figure 16
24 | Dell PowerConnect W-Series Specific Capabilities in AirWave
Remote AP Detail Page
ARM and Channel Utilization Graphs
Dell PowerConnect W-AirWave 7.5 | Best Practices Guide
Figure 15