Wi-Fi Tag Setup Guidelines - Dell PowerConnect W-Airwave Manual

</rfid>
<rfid battery-level=0 chirp-interval= radio-mac=00:14:7E:00:4D:06
</rfid>
</visualrf:rfids>

Wi-Fi Tag Setup Guidelines

Ensure that the tags can be heard by at least three (3) access points from any given location. The

recommended value is is 4 APs.
Ensure that the tags chirp on all regulatory channels.

Dell PowerConnect W-AirWave 7.5 | Best Practices Guide
<discovering-radio ap=SC-MB-03-AP06 dBm=-74 id=769 index=1
timestamp=2008-10-21T12:23:20-04:00/>
<discovering-radio ap=SC-MB-01-AP06 dBm=-58 id=708 index=1
timestamp=2008-10-21T12:23:20-04:00/>
<discovering-radio ap=SC-MB-03-AP02 dBm=-91 id=734 index=1
timestamp=2008-10-21T12:23:20-04:00/>
vendor=>
<radio phy=g xmit-dbm=10.0/>
<discovering-radio ap=SC-SB-GR-AP04 dBm=-91 id=837 index=1
timestamp=2008-10-21T12:21:08-04:00/>
<discovering-radio ap=SC-MB-03-AP06 dBm=-79 id=769 index=1
timestamp=2008-10-21T12:22:08-04:00/>
<discovering-radio ap=SC-MB-01-AP06 dBm=-59 id=708 index=1
timestamp=2008-10-21T12:23:08-04:00/>
<discovering-radio ap=SC-MB-02-AP04 dBm=-90 id=806 index=1
timestamp=2008-10-21T12:22:08-04:00/>
Increasing Location Accuracy | 43