Viewing Controller License Information; Rogue Device Classification - Dell PowerConnect W-Airwave Manual

Viewing Controller License Information

Follow these steps to view your controller's license information in AirWave:
1. Navigate to the APs/Devices > Monitor page of a controller under AirWave management.
2. Select the License link in the Device Info section. A pop-up window appears listing all licenses.
Figure 20

Rogue Device Classification

Complete this section if you have completed WMS Offload procedure above. After offloading WMS, AirWave
maintains the primary ARM, WIPS, and WIDS state classification for all devices discovered over-the-air.
Table 4
AirWave Controller Classification
Unclassified (default state)
Valid
Suspected Neighbor
Neighbor
Suspected Rogue
Rogue
Contained Rogue
To check and reclassify rogue devices, follow these steps:
1. Navigate to the Rogue > Detail page for the rogue device, as shown in .
Dell PowerConnect W-AirWave 7.5 | Best Practices Guide
License Popup from APs/Devices > Monitor
WIPS/WIDS to
AirWave Controller
Classification Matrix
ArubaOS (WIPS/WIDS)
Unknown
Valid
Interfering
Known Interfering
Suspected Rogue
Rogue
DOS
Dell PowerConnect W-Series Specific Capabilities in AirWave | 27