Tracking Location History; Checking Signal Strength To Client Location; Viewing An Ap's Wireless Rf Environment - Dell PowerConnect W-Airwave User Manual

Client/Rogue Surveys - all surveys are off

Walls - all walls are displayed

Lines - client to AP of association

Labels - all labels are disabled

To further diagnose client issues, QuickView provides several toggles as follows:

Tracking Location History

Select the client icon in the Floor Plan and select Display from the pop-up menu shown in
Figure 22 Show Location History
A location history player, illustrated in
Figure 23 Location History Player

Checking Signal Strength to Client Location

1. On a Floor Plan, locate the Signal menu widget.
2. Click within the dBm selector color wheel to desired signal level to display. The heatmap updates
immediately.
Figure 24 dBm Selector Wheel

Viewing an AP's Wireless RF Environment

To view an access point's RF environment from APs/Devices > Monitor page:
1. Select a device of interest from APs/Devices > List, or any other AMP page that lists your APs. The APs/
Devices > Monitor page opens.
2. Click on the QuickView thumbnail showing the location of the AP, shown on the right side of
Dell PowerConnect W AirWave 7.2 | VisualRF User Guide
Figure 23, appears at the bottom of the QuickView window.
Figure 22:
Figure 25:
Setting Up and Tuning VisualRF | 27