Step 10 - Configure The Aaa Override Setting - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Step 10 – Configure the AAA Override setting
Under the WLAN->Edit->Advanced locate and enable the Allow AAA Override feature. This is
critical for the Amigopod to be able to send an override to the Cisco WLC to terminate the user
session based on the desired account lifetime in the Amigopod user interface.
IMPORTANT: Without AAA Override enabled you will not be able to disconnect users from the
Amigopod user interface.
IMPORTANT: Click the Apply button to save the changes.
16
CONFIDENTIAL