Step 8 - Configure The Security Wlan Settings - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Step 8 – Configure the Security WLAN settings
 
Under the WLANs Edit Security tab WLAN security settings can be configured. Layer 2
encryption technologies such as WEP and WPA can applied through the Layer 2 sub tab and
are specific to each site security policy and are therefore considered outside the scope of this
configuration guide.
IMPORTANT: Under the Security->Layer 3, critical settings for the Captive Portal feature must
be configured.
Now available in WLC code 4.2.x versions the Over-ride global config is now supported on a per
SSID basis. In the example we will configure the Web Auth Type to External and enter the URL
of the desired Amigopod captive portal login page (See Step 3 in the Amigopod Configuration
section)
IMPORTANT: The PreAuth ACL must be configured to permit the traffic from the wireless client
to be redirected to the Amigopod captive portal. Select the appropriate ACL from the drop down
list. (previously created ACL in Step 5 – Amigopod_PreAuth)
IMPORTANT: Click the Apply button to save the changes.
14
CONFIDENTIAL