Step 6 - Create The New Wireless Lan - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Rule 5 enables communication FROM the amigopod server (10.162.110.13) NOTE: This rule
can be further refined to restrict access TO the guest network and or include protocol
restrictions such as HTTP/HTTPS.
Rule 6 is a deny all statement that prevents all other traffic from the guest from reaching
anything (Optional – there is an implicit deny all at the end of the ACL).
IMPORTANT: Remember to Save Configuration when done creating ACL rules.
Step 6 – Create the new Wireless LAN
A WLAN needs to be defined to service the Guests and in the example below you can see the
configured ssid is amigopod_guest. Under the WLANs menu option select the New... button to
display the configuration screen shown below.
Configure the SSID Profile Name and the WLAN SSID setting to match your desired
configuration for your deployment. In the example both the profile name and the SSID have
been set to Amigopod_Guest and amigopod_guest respectively. Click the Apply button to
commit the changes.
Note: For the purposes of this guide, the Layer 2 Security settings have been configured with
Open authentication (no encryption). This may not be suitable for all deployments based on the
desired Layer 2 security policy.
IMPORTANT: Click the Apply button to save the changes.
12
CONFIDENTIAL