Amigopod Configuration
The following configuration procedure assumes that the Amigopod software or appliance has
been installed properly and the basic IP configuration has been applied through the setup
wizard to allow the Administrator to access the Web User Interface. The following table reviews
the IP Addressing used in the example environment but this would be replaced with the site
specific configuration information of each customer deployment:
Cisco WLC Address
Internet Gateway Address
Amigopod IP Address
Amigopod RADIUS port
DHCP Server
Client DHCP Range
Please refer to the Amigopod Quick Start Guide for more information on the basic configuration
of the Amigopod software.
CONFIDENTIAL
10.51.1.234
10.51.0.1
10.162.110.13
Auth 1812 Acc 1813 (default settings)
10.51.0.10
10.51.1.1-128
17