Step1 - Create Radius Nas For Cisco Wlc - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Step1 – Create RADIUS NAS for Cisco WLC
In order for the Cisco WLC to authenticate users it must be able to communicate with the
Amigopod RADIUS Server. In Step 3 of the Cisco WLC configuration, a RADIUS Authentication
Server was defined. This step configures the matching Amigopod NAS definition for the Cisco
WLC. The RADIUS key used in Step 3 MUST to be configured exactly the same here for the
RADIUS transactions to be successful.

Navigate to RADIUS NAS List and click on the Create button to create a new NAS device.
Enter the IP Address of the Cisco WLC, select the NAS Type as Cisco Systems (RFC3576
Support) and enter the Shared Secret from Step 3 of the Cisco WLC Configuration into the
Shared Secret field.
NOTE: You may now opt for Amigopod to automatically create a customized Web Login page
for this NAS device at this time, or you may customize your own later.
IMPORTANT: Click the Create NAS Device button to commit the change to the RADIUS
database.
NOTE: The Amigopod Server will automatically attempt to ping the new NAS device. If ICMP is
disabled or filtered then this may generate a warning. Please ensure that the Amigopod Server
is able to communicate with the Cisco WLC before proceeding.
18
CONFIDENTIAL