Step 1 - Create New Vlan (Optional) - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Step 1 – Create New VLAN (Optional)
A new vlan can to be created to bind to the new Wireless LAN that will be used for the Visitor

users. From the Controller Interfaces screen, click on the Add button and enter the new VLAN
ID and name you wish to use and then click the Apply button.
This step is considered optional as depending on the complexity of the site deployment, the
administrator may simply decide associated the new Wireless LAN with the default
Management interface and all wireless traffic will be forwarded onto this LAN. The network
design of each site will dictate whether a new VLAN is required for separation of traffic.
The configuration example used has taken this more simplistic approach of associated the new
Wireless LAN with the default Management interface.
IMPORTANT: Click the Apply button to save the changes.
7
CONFIDENTIAL