AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual page 4

Cisco wlc integration guide
Hide thumbs Also See for PowerConnect W Clearpass 100 Software:
Table of Contents

Advertisement

The following table shows the software versions used during the integration testing. This
document will be updated in the future if changes in either Amigopod or Cisco subsequent
releases affect the stability of this integration. It is advised that the customer always check for
the latest integration guide available from either Amigopod or Cisco.
Dated Tested:
Amigopod Version:
Plugins Required:
Cisco WLC Version:
Integration:
An Amigopod VM Server was deployed in its own VLAN/subnet with layer 3 access to the LAN
interface of the Cisco WLC controller. DHCP was provided on the Wireless Guest Network and
routing was enabled between subnets
Cisco WLC IP Address
Internet Gateway Address
Amigopod IP Address
Amigopod RADIUS port
DHCP Server
Client DHCP Range
The following diagram provides a high level overview of the test lab topology:
CONFIDENTIAL
September 2011
Kernel3.3.5, Radius Services 3.3.1
Standard build
4.2.209.0
HTTP Captive Portal
10.51.1.234
10.51.0.1
10.162.111.13
Auth 1812 Acc 1813 (default settings)
10.51.0.10
10.51.1.1-128
4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PowerConnect W Clearpass 100 Software and is the answer not in the manual?

This manual is also suitable for:

Amigopod

Table of Contents