Cisco Wlc Configuration - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Cisco WLC Configuration

The following configuration procedure assumes that the Cisco WLC has been powered up and a
basic IP configuration has been applied through the CLI to allow the Administrator to access the
Web User Interface. The following table reviews the IP Addressing used in the example
environment. This should be replaced with the site specific configuration information of each
customer deployment:
Cisco WLC Address
Internet Gateway Address
Amigopod IP Address
Amigopod RADIUS port
DHCP Server
Client DHCP Range
Note: In this particular guide, we use the management interface as our WLAN interface. In an
actual deployment, oftentimes you'll find a specific interface/VLAN created and designated for
use with the Guest WLAN. These will be deployment specific details and the WLC configuration
will need to be adjusted to accommodate the desired deployment configuration.
CONFIDENTIAL
10.51.1.234
10.51.0.1
10.162.110.13
Auth 1812 Acc 1813 (default settings)
10.51.0.10
10.51.1.1-128
6