Step 3 - Create Radius Authentication Server - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Step 3 – Create RADIUS Authentication Server
In order for the Cisco WLC to successfully authenticate the guest users that will be provisioned
on the Amigopod system, a RADIUS Authentication Server needs to be defined on the
 
controller. From the Security AAA RADIUS menu option, select Authentication and then click
the New button in the top corner.
Enter the IP Address of your Amigopod deployment in the Server IP Address field. This can be
found on the console of the Amigopod server. There is no need to change the default RADIUS
Port Number as this is the default port used by Amigopod.
IMPORTANT: Enter and REMEMBER the Shared Secret used for authenticating the controller
to the Amigopod RADIUS server as this MUST MATCH the configured Shared Secret that will
be input during the configuration of the Amigopod software.
IMPORTANT: Please ensure that the Network User check box is selected so that this RADIUS
server can be used to authenticate Clients connecting to the WLC.
IMPORTANT: Click the Apply button to save the changes.
9
CONFIDENTIAL