Brocade Communications Systems PowerConnect B-RX Release Note page 40

Defect ID Technical Severity
103402
103451
103539
103645
104043
IronWare Software Release 02.7.02a for Brocade BigIron RX Series Swtches
Release Notes v 1.0
Summary of Software Fixes in R02.7.02a
Summary: The system does not generate a syslog message
indicating the speed and duplex setting if the configuration of a
fiber SFP is changed to an unsupported setting.
Probability: Medium
Medium
Feature: Optics and SFP Support
Function: System
Reported in Release: BigIron RX R02.7.01
Summary: A premature flush caused by a group having greater
than 122 sources causes PIM to send out a (S, G, RPT) prune
separately from (*, G) Join.
Probability: Medium
Medium
Feature: PIM
Function: PIM Sparse
Reported in Release: BigIron RX R02.7.02
Summary: Adding or modifying a cluster-id under router bgp
could cause neighbors to flap
Probability: High
High
Feature: IP Protocol
Function: BGP
Reported in Release: BigIron RX R02.7.02
Summary: SNA-LLC frame out-of-sequence may occur when ip
multicast active is enabled
Probability: High
High
Feature: Multicast active snooping
Function: Multicast active snooping
Reported in Release: BigIron RX R02.6.00b
Summary: Layer 2 ACL accounting information is not updated on
the ports belonging to the same packet processor after an ACL
rebind, a system reload, management failover, or a hitless L2 OS
Upgrade. This occurs only for terms of an ACL containing the log-
enable option bound to a port that has enable-deny-logging
configured.
High
Probability: Medium
Feature: Layer 2 ACL, ACL Accounting
Function: Access Lists, System
Reported in Release: BigIron RX R02.7.02
Page 40 of 46