LP IronWare Image (Primary or
Secondary for Module Type 0)
Boot-Monitor Image
Startup Configuration
Boot Flash
IronWare Software Release 02.7.02a for Brocade BigIron RX Series Swtches
Release Notes v 1.0
Indicates the interface modules' primary and/or secondary IronWare
image stored in the management module's code flash if you copied the
primary and/or secondary IronWare image to all interface modules using
the copy command with the all keyword. The management module
stores these images only; it does not run the images. The output displays
the following information about the image:
Version – "2.2.1Txxy" indicates the image version number.
The "Txxy" is used by Brocade for record keeping. The "xx"
indicates the hardware type, while the "y" indicates the image
type.
Size – The size, in bytes, of the image.
Check sum – A unique ID for the image. If the contents of the
image change, the check sum changes also.
Compilation date and time – The date and time that Brocade
compiled the image.
Indicates the monitor image installed in the management module's code
flash. The output displays the following information about the image:
Version – "2.2.1Txxy" indicates the image version number.
The "Txxy" is used by Brocade for record keeping. The "xx"
indicates the hardware type, while the "y" indicates the image
type.
Size – The size, in bytes, of the image.
Check sum – A unique ID for the image. If the contents of the
image change, the check sum changes also.
Compilation date and time – The date and time that Brocade
compiled the image.
The output displays the following information about the startup
configuration, which is saved in the management module's code flash:
Size – Size, in bytes, of the startup configuration.
Check sum – A unique ID for the file. If the contents of the
file change, the check sum changes also.
Modification date and time – Date and time that the startup
configuration was last saved.
The model number and size of the management module's boot flash.
Page 16 of 46
Need help?
Do you have a question about the PowerConnect B-RX and is the answer not in the manual?
Questions and answers