Brocade Communications Systems PowerConnect B-RX Release Note page 18

Boot-Monitor Image
Boot Flash
Boot-Monitor Image
FPGA Version Information
IronWare Software Release 02.7.02a for Brocade BigIron RX Series Swtches
Release Notes v 1.0
Indicates the monitor image installed in the interface module's code flash.
The image must be imlb<xxxxx>. The output displays the following
information about the image:

Version – "2.2.1Txxy" indicates the image version number.
The "Txxy" is used by Brocade for record keeping. The "xx"
indicates the hardware type, while the "y" indicates the image
type.

Size – The size, in bytes, of the image.

Check sum – A unique ID for the image. If the contents of the
image change, the check sum changes also.

Compilation date and time – The date and time that Brocade
compiled the image.
The model number and size of the interface module's boot flash.
Indicates the boot image installed in the interface module's boot flash.
The output displays the following information about the image:

Version – "2.2.1Txxy" indicates the image version number.
The "Txxy" is used by Brocade for record keeping. The "xx"
indicates the hardware type, while the "y" indicates the image
type.

Size – The size, in bytes, of the image.

Check sum – A unique ID for the image. If the contents of the
image change, the check sum changes also.

Compilation date and time – The date and time that Brocade
compiled the image.
The following Images are only displayed from the show version
command:
MBRIDGE Revision – The version number of the MBRIDGE
1.
FPGA installed on the Management module for the BigIron
RX-16/8/4
MBRIDGE32 Revision – The version number of the
2.
MBRIDGE32 FPGA installed on the Management module for
the BigIron RX-32.
SBRIDGE Revision – The version number of the SBRIDGE
3.
FPGA installed on the BigIron RX-32 Switch Fabric modules.
Page 18 of 46