Brocade Communications Systems PowerConnect B-RX Release Note page 6

Category

Management Options

Security

CPU protection:

Logging

sFlow

Uni-directional Link Detection
(UDLD)
Layer 2 features

802.1d

802.1p

802.1q
IronWare Software Release 02.7.02a for Brocade BigIron RX Series Swtches
Release Notes v 1.0
Feature description
Serial and Telnet access to industry-standard Command Line
Interface (CLI)
SSHv2
TFTP
Web-based GUI
SNMP versions 1, 2, and 3
IronView Network Manager
AAA Authentication
Local passwords
RADIUS
Secure Shell (SSH) version 2
Secure Copy (SCP)
TACACS/TACACS+
User accounts
802.1x: All EAP types, including MD5, TLS, TTLS, and PEAP
Multi-device port authentication
Note: Telnet, SSH, Web and SNMP servers are disabled by default,
and can be enabled selectively.
There are no CLI commands for CPU protection. The BigIron RX
forwards unknown unicast, broadcast and multicast packets in
hardware; therefore, the CPU is automatically 'protected' from having
to handle too many packets.
Multiple SysLogD server logging
sFLow version 5
Monitors a link between two devices and brings the ports on both
ends of the link down if the link goes down at any point between the
two devices.
Spanning Tree Protocol (STP)
and
Single Spanning Tree Protocol (SSTP)
Quality of Service (QoS) queue mapping
see VLANs, below
Page 6 of 46