Bandwidth Control; Control Settings; Rules List - TP-Link TL-WA7210N User Manual

TL-WA7210N

5.14 Bandwidth Control

There are two submenus under the Bandwidth Control menu as shown in Figure 5-60: Control
Settings and Rules List. Click any of them, and you will be able to configure the corresponding
function. The detailed explanations for each submenu are provided below.
5.14.1

Control Settings

Choose menu Bandwidth Control > Control Settings, and then you can configure the Egress
Bandwidth and Ingress Bandwidth in the next screen (shown in Figure 5-61). Their values should
be configured less than 1000000Kbps.
Enable Bandwidth Control - If enabled, the Bandwidth Control rules will take effect.

Egress Bandwidth - The upload speed through the WAN port.

Ingress Bandwidth - The download speed through the WAN port.

5.14.2

Rules List

Choose menu "Bandwidth Control > Rules List", and then you can view and configure the
Bandwidth Control rules in the screen below.
ID - The sequence of entry.

2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 5-60 Bandwidth Control
Figure 5-61 Bandwidth Control Settings
Figure 5-62 Bandwidth Control Rules List
114