TP-Link TL-WA7210N User Manual page 40

TL-WA7210N

Note:
Ensure you select a correct country to comply with local laws. Incorrect settings may cause
interference.
 Transmission Power - The available options of transmission power are determined by the
region selected.
 Wireless Security Mode - You can select one of the following security options:
WPA/WPA2-PSK - Select WPA based on pre-shared passphrase.

WEP - Select WEP based on none pre-shared passphrase.

No Security - The wireless security function is disabled. The wireless stations will

be able to connect the Device without encryption.
 Auth Type - This option should be chosen if the Security Mode is WEP. It indicates the
authorization type of the Root AP.
 Key Format - This option should be chosen if the Security Mode is WEP. It indicates the
format of the WEP key.
 WEP Index - This option should be chosen if the Security Mode is WEP. It indicates the index
of the WEP key.
 Wireless Password - If the AP your Device is going to connect needs password, you need to
fill the password in this blank.

Note:
The operating distance or range of your wireless connection varies significantly based on the
physical placement of the Device. For best results, place your Device
Near the center of the area in which your wireless stations will operate.

In an elevated location such as a high shelf.

Away from the potential sources of interference, such as PCs, microwaves, and cordless

phones.
With the Antenna in the upright position.

Away from large metal surfaces.

Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the Device.
2. The AP List page will appear shown as Figure 3-29. Find the BSSID (the same as the MAC
address) of the remote AP that you want to repeat, and then click Connect on the right side
of the line.
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
Note Dialog
30