Chapter 1. Introduction; Overview Of The Product; Features - TP-Link TL-WA7210N User Manual

TL-WA7210N
Chapter 1. Introduction
1.1

Overview of the Product

The TL-WA7210N 2.4GHz 150Mbps Outdoor Wireless Access Point is dedicated to Outdoor
wireless network solutions. The TL-WA7210N 2.4GHz 150Mbps Outdoor Wireless Access Point
will allow you to connect your network with other wireless devices wirelessly, sharing Internet
Access, files and fun, easily and securely. The high power design will also help you build a more
stable link or cover more area outdoors.
The TL-WA7210N 2.4GHz 150Mbps Outdoor Wireless Access Point provides 7 operation modes
for multi-user to access the Internet: AP Client Router, AP Router, Access Point, Multi-SSID,
Repeater (Range Extender), Bridge with AP and Client. In AP Client Router mode, it works as a
WISP CPE and can access the Internet wirelessly via your WISP. In AP Router mode, it can
access the Internet via an ADSL/Cable Modem, while sharing data wirelessly.
With the most attentive wireless security, the TL-WA7210N 2.4GHz 150Mbps Outdoor Wireless
Access Point provides multiple protection measures. It can be set to turn off wireless network
name (SSID) broadcast so that only stations that have the SSID can be connected. The AP
provides wireless LAN 64/128/152-bit WEP encryption security, and WPA/WPA2 and
WPA-PSK/WPA2-PSK authentication, as well as TKIP/AES encryption security. It also supports
VPN pass-through for sensitive data secure transmission.
The TL-WA7210N 2.4GHz 150Mbps Outdoor Wireless Access Point complies with the IEEE
802.11n, IEEE 802.11g and IEEE 802.11b standards so that the data transmission rate is up to
150Mbps. The wireless transmission range can extend up to tens of kilometers.
1.2

Features

 Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u
standards.
 Wireless Data transfer rates up to 150Mbps.
 Supports AP Client Router, AP Router, Access Poiint, Multi-SSID, Repeater (Range
Extender), Bridge with AP, Client mode
 High output transmit power and receive sensitivity optimized.
 Supports Client Router Mode for WISP CPE.
 Supports passive power over Ethernet.
 Supports Wireless Distribution System (WDS).
 ACK timeout adjustment for long range transmission, up to 50km.
 Supports Antenna Alignment.
 Provides throughput monitor indicating the current wireless throughput.
 Supports Layer 2 User Isolation.
 Supports Ping Watch Dog.
 Supports link speed test.
 Output transmit power adjustable.
 Supports PPPoE, Dynamic IP, Static IP Internet Access.
 Built-in NAT and DHCP server supporting static IP address distributing.
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
2