TP-Link TL-WA7210N User Manual page 46

TL-WA7210N
Click Next in Figure 3-7, and then Wireless page will appear as shown in Figure 3-37. Click
1.
Survey button to scan the wireless networks.
 Wireless Name of Remote AP - The SSID of the AP your Device is going to connect to as a
client. You can also use the survey function to select the SSID to join.
 Mac Address of Remote AP: - The Mac Address of the AP your Device is going to connect
to as a client. You can also use the survey function to select the BSSID to join.
 Survey - Click this button, you can search the APs.
 Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this filed. If your country or region is
not listed, please contact your local government agency for assistance.
When you select your local region from the pull-down list, the Note Dialog of TERMS OF USE
will pop up. Select I agree to these terms of use, and click Accept to continue.

Note:
Ensure you select a correct country to comply with local laws. Incorrect settings may cause
interference.
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 3-37 Wireless
Note Dialog
36