TP-Link TL-WA7210N User Manual page 43

TL-WA7210N
 Mac Address of Remote AP: - The Mac Address of the AP your Device is going to connect
to as a client. You can also use the survey function to select the BSSID to join.
 Survey - Click this button, you can search the APs.
 Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this filed. If your country or region is
not listed, please contact your local government agency for assistance.
When you select your local region from the pull-down list, the Note Dialog of TERMS OF USE
will pop up. Select I agree to these terms of use, and click Accept to continue.

Note:
Ensure you select a correct country to comply with local laws. Incorrect settings may cause
interference.
 Transmission Power - The available options of transmission power are determined by the
region selected.
 Channel - This field determines which operating frequency will be used. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
 Wireless Security Mode - This option should be chosen according to the AP's security
configuration. It is recommended that the security type is the same as your AP's security type.
WPA/WPA2-PSK - Select WPA based on pre-shared passphrase.

WEP - Select WEP based on none pre-shared passphrase.

No Security - The wireless security function is disabled. The wireless stations will

be able to connect the Device without encryption.
 Auth Type - This option should be chosen if the Security Mode is WEP. It indicates the
authorization type of the Root AP.
 Key Format - This option should be chosen if the Security Mode is WEP. It indicates the
format of the WEP key.
 WEP Index - This option should be chosen if the Security Mode is WEP. It indicates the index
of the WEP key.
 Wireless Password - If the AP your Device is going to connect needs password, you need to
fill the password in this blank.
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
Note Dialog
33