TP-Link TL-WA7210N User Manual page 39

TL-WA7210N
 Repeater Mode - Choose mode for repeater.
WDS Repeater - In WDS Repeater mode, the AP with WDS enabled will relays data

to an associated root AP. AP function is enabled meanwhile. The wireless repeater
relays signal between its stations and the root AP for greater wireless range. Please
input the MAC address of root AP in the field "MAC of AP".
Universal Repeater - In Universal Repeater mode, the AP with WDS disabled will

relays data to an associated root AP. AP function is enabled meanwhile. The
wireless repeater relays signal between its stations and the root AP for greater
wireless range. Please input the MAC address of root AP in the field "MAC of AP".
 Wireless Name of Root AP - The SSID of the AP your Device is going to connect to as a
client. You can also use the survey function to select the SSID to join.
 MAC Address of Root AP - The Mac Address of the AP your Device is going to connect to as
a client. You can also use the survey function to select the BSSID to join.
 Survey - Click this button, you can search the APs.
 Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the AP can be used. It may be illegal to use the wireless function of the AP
in a region other than one of those specified in this filed. If your country or region is not listed,
please contact your local government agency for assistance.
When you select your local region from the pull-down list, the Note Dialog of TERMS OF USE
will pop up. Select I agree to these terms of use, and click Accept to continue.
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 3-28 Wireless
29