Table of Contents
Advertisement
TL-WA7210N
3.
The page below will appear. Create a name for the Local Wireless Network. The security
settings for the local network will be set the same as your WISP by default. Then click Next.
Ticking off Use the same security settings for the local wireless network as the remote
WISP station, the page will show as below. You can choose the Wireless Security Mode
and fill in Wireless Password for the Local Wireless Network.
4.
When you have finished the wireless settings above, you will come to the Finish page shown
as Figure 3-15. Please check the configurations you have made. If anything is wrong, please
go Back to reset. When confirmed, please click Finish/Reboot button in Figure 3-15 to make
all the configurations take effect.
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
Figure 3-12 AP List
Figure 3-13 Local Wireless AP Setting
Figure 3-14 Local Wireless AP Setting
18
Hide quick links:
Advertisement
Table of Contents
