The View Tab - Brother BES Monogramming Suite Instruction Manual

Tools on the Arrange Tab
Tool
Select: Selects objects in the design window.
Horizontal Center: Takes all selected objects and centers
them in the selection box. The objects are moved so that they
are centered left-to-right with each other, but they are not
moved up or down.
Vertical Center: Takes all selected objects and centers them
in the selection box. The objects are moved so that they are
centered top-to-bottom with each other, but they are not
moved left or right.
Center: Centers one or more selected objects proportionally
within the current hoop.
If more than one object is selected, the entire group is moved
together to the center of the hoop; the objects selected remain
in the same position relative to each other as they had before
being centered.
Flip Horizontal: Flips one or more selected objects
horizontally.
Flip Vertical: Flips one or more selected objects vertically.

The View Tab

The controls on the View tab allow you to change what appears
on your workspace; which panels are displayed, and so on. The
areas found on this tab are Windows and Program Preferences.
Windows
In the windows area, check the box to show the corresponding
window or panel, and uncheck it to hide that window or panel.
• Sequence View. Shows/hides the Sequence View panel.
• Palette. Shows/hides the thread palette.
• Properties. Shows/hides the properties panel.
• Simulator. Shows/hides the sewing simulator.
• Status. Shows/hides the status bar.
Learning about the Workspace 11
What it means