Oki CX4545 MFP Printing Manual page 72

2 PRINTING FROM WINDOWS
- Drawer 1, 2 & Drawer 3, 4 — Select this when Drawers 1, 2, 3 and 4 are installed.
- Drawer 1, 2 & LCF — Select this when Drawers 1, 2 and the LCF are installed.
The Large Capacity Feeder (optional) is not available for some countries or regions.
3. Finisher
This sets whether or not the Finisher (optional) is installed.
- None — Select this when a Finisher (optional) is not installed.
- Hanging Finisher — Select this when a Hanging Finisher (optional) is installed.
- Finisher — Select this when a Finisher (optional) is installed.
- Saddle Stitch Finisher — Select this when a Saddle Stitch Finisher (optional) is installed.
- Job Separator — Select this when a Job Separator (optional) is installed.
- Offset Tray — Select this when a Offset Tray (optional) is installed.
4) Hole Punch Unit
This sets whether or not the Hole Punch Unit (optional) is installed.
- None — Select this when a Hole Punch Unit (optional) is not installed.
- 2 Holes — Select this when a 2 Hole Punch Unit (optional) is installed.
- 2/3 Holes — Select this when a 2/3 Hole Punch Unit (optional) is installed.
- 4 Holes (F) — Select this when a 4 hole (F) punch unit (optional) is installed.
- 4 Holes (S) — Select this when a 4 hole (S) punch unit (optional) is installed.
5) External LCF
This sets whether or not the External Large Capacity Feeder (optional) is installed.
- None — Select this when an External Large Capacity Feeder (optional) is not installed.
- External LCF — Select this when an External Large Capacity Feeder (optional) is installed.
6) Inserter Unit
Select this check box when the Inserter (optional) is installed.
This setting is selectable only when [PCL] is selected in the [Model Selection] box.
7) [Drawer Settings]
Click this to set the paper size and paper type of each drawer. The [Drawer Settings] dialog box appears by clicking
this.
 P.71 "Drawer Settings"
8) [Account Settings]
Click this button to set whether the user management setting is enabled or not. You can also set whether the Private
Print Restriction function and Hold Print Restriction function are enabled or not. The [Account Settings] dialog box
appears upon clicking this button.
 P.72 "Account Settings"
9) [Customization]
This sets options specific to PCL, or changes the Plug-in settings or the printer driver language. When you click this,
the [Customization] dialog box appears.
 P.73 "Customization: [Plug-in] tab"
 P.74 "Customization: [Language] tab"
 P.75 "Customization: [PDL Settings] tab"
The Printer Language setting is available only when a PCL printer driver is used.
10) [Version Information]
Click this to display the [Version Information] dialog box.
11) Device Settings Retrieval
This enables SNMP communication between this equipment and your computer to retrieve the option configuration
information.
Update Automatically
Select this check box to update the option configuration information automatically every time you open the [Device
Settings] tab.
[Update Now]
Click this to obtain the configuration information from this equipment immediately.
70 Setting Up Print Options