Oki CX4545 MFP Printing Manual page 15

2.PRINTING FROM WINDOWS
5
Set the following options and click [OK].
Drawer 1 — Select the size and type of paper that is loaded in the 1st Drawer.
Drawer 2 — Select the size and type of paper that is loaded in the 2nd Drawer.
Drawer 3 — Select the size and type of paper that is loaded in the 3rd Drawer (optional) when it is installed.
Drawer 4 — Select the size and type of paper that is loaded in the 4th Drawer (optional) when it is installed.
LCF — Select the size and type of paper that is loaded in the Large Capacity Feeder (optional) when it is installed.
External LCF — Select the size and type of paper that is loaded in the External Large Capacity Feeder (optional)
when it is installed.
Bypass Tray — Select the type of paper that is loaded in the Bypass Tray.
Override Application Paper Source Settings — Select this check box to use the paper source setting in the
printer driver rather than the application setting.
 Setup items differ depending on the model and the option configuration.
 For more information about each item, see the descriptions about the Drawer Settings.
 P.71 "Drawer Settings"
6
Click [Apply] or [OK] to save settings.
2 PRINTING FROM WINDOWS
Before Using the Printer Driver 13