Output Bin; Media Type - Oki CX4545 MFP Printing Manual

4.PRINTING FROM UNIX/Linux
 Output Bin
The output bin can be specified using the following options.
Option Value Alternate Value
inner
bin1
bin2
If the Finisher (optional) is not installed on the equipment, the default output tray will be used (inner). If the Finisher
(optional) is installed on the equipment, the default output tray will be used (bin2).
Example: The command to specify output bin 1 is "lp -o bin1 <filename>".
 Hole Punching
This sets whether a print job is printed with hole punches. When the hole punch option is installed it can be activated using
the following option.
Option Value Alternate Value
punch=0 nopunch
punch=1
punch=2
punch=3
punch=4
If this option is not specified, the default value of "nopunch" will be used.
This function is not available for all paper sizes and the users should refer to the Copying Guide for a list of compatible
paper sizes. In particular, A5, A6 and statement paper sizes will not work with this function.
Example: The command to hole punch the long edge feed portrait page is "lp -o punch=1 <filename>".
 Media Type
The paper source can also be selected using the media type using the following option.
Option Value Alternate Value
mtype=Plain
mtype=
Transparency
mtype=Thick1
mtype=Thick2
mtype=Thick3
In PostScript Deferred Media Selection is always turned on so the paper size has priority over the media type and the
paper source.
In PCL5e the paper size always has priority over the media type and the paper source.
If this option is not specified, the default value will be used.
Example: The command to specify Thick1 media type is "lp -o mtype=Thick1 <filename>".
Description
Select the inner tray.
Select the upper output tray of the Finisher (optional).
Select the lower output tray of the Finisher (optional).
Description
Hole punching is turned off.
Hole punch on long edge without rotation.
Hole punch on short edge without rotation.
Hole punch on long edge with 180 degree rotation.
Hole punch on short edge with 180 degree rotation.
Description
A paper source that contains Plain paper is requested.
A paper source that contains transparency slides is
requested.
A paper source that contains Thick1 paper is
requested.
A paper source that contains Thick2 paper is
requested.
A paper source that contains Thick3 paper is
requested.
4 PRINTING FROM UNIX/Linux
Printing From Application 171