Oki CX4545 MFP Printing Manual page 162

3 PRINTING FROM Macintosh
 Destinations selectable differ depending on the model and the option configuration.
 Depending on the type of Finisher (optional) installed and destination settings, stapling and hole punching may
not be performed.
 Depending on the equipment settings, the paper may be delivered to a tray that cannot carry out stapling or
hole punching when [Printer's Default] is selected as the [Destination] option.
 [Tray 1] and [Tray 2] can be enabled when the Finisher (optional) or Saddle Stitch Finisher (optional) is
installed.
 [Side Exit Tray] can be enabled only when neither of the Finisher (optional) and the Saddle Stitch Finisher
(optional) is installed.
2) Hole Punch
This sets whether or not a print job is hole punched.
- Off — Select this to print without hole punches.
- Long Edge Punch without rotation — Select this to create holes on the left side for a portrait document, or on the
top for a landscape document.
- Short Edge Punch without rotation — Select this to create holes on the top for a portrait document, or on the
right for a landscape document.
- Long Edge Punch with 180 degree rotation — Select this to create holes on the right side for a portrait
document, or on the bottom for a landscape document.
- Short Edge Punch with 180 degree rotation — Select this to create holes on the bottom for a portrait document,
or on the left for a landscape document.
This option cannot be selected if a Hole Punch Unit (optional) is not installed.
3) Stapling
This option sets whether a print job is stapled.
- Off — Select this to print without stapling.
- Upper Left (Portrait) / Upper Right (Landscape) — Select this to staple on the upper left for a portrait document,
or on the upper right for a landscape document.
160 Printing From Application on Mac OS X 10.2.4 to Mac OS X 10.7.x