Oki CX4545 MFP Printing Manual page 32

2 PRINTING FROM WINDOWS
 There are also 20 custom paper sizes in the [Original Paper Size] box. You can set the custom paper sizes in
the [Others] tab.
 P.63 "[Others] tab"
 The default paper size will be [Letter] or [A4] according to the regional setting in the Windows.
 [305 x 457 mm] is displayed only for the European version, and [12 x 18"] is displayed only for the US version.
 [305 x 457 mm], [12 x 18"], [320 x 450 mm], and [320 x 460 mm] is enabled only when the ES9460 MFP/
ES9470 MFP/CX3535 MFP/CX4545 MFP is used.
 [Env-Com10 (4 1/8 x 9 1/2")], [Env-Mornarch (3 7/8 x 7 1/2")], [Envelope DL (110 x 220 mm)], [Envelope Cho-3
(120 x 235 mm)], and [Envelope You-4 (105 x 235 mm)] is enabled only when the ES9160 MFP/ES9170 MFP is
used.
 Setup items differ depending on the model.
2) Print Paper Size
Select this to enlarge or reduce a page image to fit exactly in the selected paper size. If you do not wish to enable
enlarge or reduce printing, select [Same as Original Size].
Also when you want to enable Tab printing, select [Letter Tab] or [A4 Tab] here. When you select [Letter Tab] or [A4
Tab], the [Primary Tab Dialog] dialog box appears.
 P.33 "Primary Tab Dialog"
There are also 20 custom paper sizes in the [Print Paper Size] box. You can set the custom paper sizes in the
[Others] tab.
 P.63 "[Others] tab"
3) Image Scale
Select this check box to enter the scale manually to enlarge or reduce an image. The ratio can be set at between 25
and 400%.
For detailed instructions on how to print with the [Image Scale] setting, see the following page:
 P.90 "Fitting images within paper size"
4) Paper Source
This selects a paper source to print a job in the most suitable paper size. The figure on the right indicates the paper
size set for each paper source. When you select a paper source, the chosen one is indicated with a green square in
the figure.
You can select a paper source by directly clicking on the figure on the right.
- Auto — Automatically selects the paper set in this equipment according to the printed document size.
- Drawer 1 — Paper is fed from the 1st Drawer.
- Drawer 2 — Paper is fed from the 2nd Drawer.
- Drawer 3 — Paper is fed from the 3rd Drawer.
- Drawer 4 — Paper is fed from the 4th Drawer.
- LCF — Paper is fed from the Large Capacity Feeder (optional). This cannot be selected if the Large Capacity
Feeder (optional) is not installed.
- Bypass Tray — Paper is fed from the Bypass Tray. When this is selected and print a job, [JOB STATUS] on the
touch panel will blink. Press [JOB STATUS] and check the paper size of the job. Then set the paper and press the
[START] button to print a job.
- External LCF — Paper is fed from the External Large Capacity Feeder (optional). This cannot be selected if the
External Large Capacity Feeder (optional) is not installed.
30 Setting Up Print Options