Oki CX4545 MFP Printing Manual page 69

2.PRINTING FROM WINDOWS
3) SNMP V3
If SNMP V3 is enabled, select one of the following items to set how users are authenticated.
User ID File — Select this option when you want to use a user ID file. Click [Browse] and specify the user ID file.
User Name/Password — Select this option when you want to use the user name and password. When this option is
selected, use the keyboard to select the following items:
- User Name
- Authentication Protocol
- Authentication Password
- Privacy Protocol
- Privacy Password
 If you select to enable SNMP V3, consult your network administrator for preliminary advice on how to
authenticate users.
 Up to 31 characters including the following symbols can be entered for each of the User Name, Authentication
Password and Privacy Password.
! $ % & ' ( ) - , < > @ [ ] ^ _ ` { } ~
4) [Restore Defaults]
Click this button when you want to reset all the settings back to the defaults.
Add Printer
2
1) Discovered Printers
This displays the OKI MFP series discovered over a network. You can check its name, installation site, model name
and status.
The OKI MFP series to be discovered differ depending on the settings on the [Device Settings] tab or the type of
your printer driver.
 If any of the models below is selected in the [Model Selection] box on the [Device Settings] tab, only they can
be discovered and other OKI MFP series models are not.
- ES9160 MFP
- ES9170 MFP
- ES9460 MFP
- ES9470 MFP
- CX3535 MFP
- CX4545 MFP
 If [PCL] is selected in the [Model Selection] box on the [Device Settings] tab, any OKI MFP series model to
which your printer driver can be applied is discovered.
2) [Add]
This adds the printers selected in the [Discovered Printers] box to [Printer Folder].
1
3
4
2 PRINTING FROM WINDOWS
Setting Up Print Options 67