Oki CX4545 MFP Printing Manual page 209

5.MANAGING PRINT JOBS FROM THE CONTROL PANEL
5
In the list of files, select the file that you want to print. Select the files you want to print
from the list.
 If the target file is not displayed on the screen, use
 To select a file contained in a folder, select the folder and press [OPEN]. In the list of files that appears, select
the desired file to print.
 If you select an encrypted PDF file for which a password has been set, the password entry screen is displayed.
Proceed to Step 6.
 If you change the paper size, stapling position, 2-Sided Printing setting or PDF Overprint setting, proceed to
Step 9. If you start printing without changing any of them, proceed to Step 10.
Do not disconnect the USB storage device when "USB DEVICE in use Do not remove USB DEVICE" is
displayed on the screen. Removing the device while the message is displayed could destroy the data in the
device or cause a malfunction of the equipment.
6
If you select an encrypted PDF file for which a password has been set, press
[PASSWORD].
5 MANAGING PRINT JOBS FROM THE CONTROL PANEL
and to change between pages.
Monitoring the Print Job Status 207