Dell 5210n Mono Laser Printer User Manual page 71

Internal System Error Reload
Bookmarks
Internal System Error, Reload Security
Certificates
Invalid Network Code
Invalid Engine Code
Invalid PIN
Load manual feeder with
<Custom Type>
Load manual feeder with
<Custom String>
Load manual feeder with <size>
Load manual feeder with
<size> <type>
Load <src> with <Custom Type Name>
Load <src> with <Custom String>
Load <src> <size>
Load <src> <type> <size>
Maintenance
Menus are Disabled
Network
Network <x>
Network <x>, <y>
No held jobs
No jobs found
No jobs to cancel
Overflow Bin Full
Parallel
Parallel <x>
Power Saver
Printer locked, enter PIN to unlock
Printing
Printing Alignment Page
Programming System Code
Programming Flash
Ready
Reattach bin <x>
Reload the Bookmarks.
l
Press the Select button
l
Reload the Security Certificates.
l
Press the Select button
l
Download valid code to the internal print server.
NOTE: You can download network code while this message is displayed.
Download valid engine code to the printer.
NOTE: You can download engine code while this message is displayed.
Enter the correct PIN.
Load the specified paper in the manual feed tray or multipurpose feeder.
l
Press the Select button
l
the input sources.
If the printer finds a tray that has paper of the correct type and size, it feeds paper from that tray. If the
printer cannot find a tray with the correct paper type and size, it prints on whatever paper is installed in the
default input source.
Cancel the current job.
l
Load the input source with the correct type and size media.
l
Cancel the current job.
l
Replace the maintenance items and, if necessary, reset the printer maintenance counter.
The printer menus are disabled. You cannot change the printer settings from the operator panel.
NOTE: You can still cancel a job, print a confidential job, or print a held job.
Contact your system support person.
A network interface is the active communication link.
A network interface is the active communication link, where <x> represents the active communication link, and <y>
represents the channel.
Wait for the message to clear.
NOTE: The four-digit personal identification number (PIN) you entered is not associated with any confidential print
job.
Select Try again to enter another PIN.
l
Select Cancel to exit the Enter PIN screen.
l
Wait for the message to clear.
Remove the stack of paper from the bin to clear the message.
A parallel interface is the active communication link.
Send a job to print.
l
Press the Select button
l
message.
The operator panel has been locked.
Enter the correct PIN number.
Wait for the message to clear.
Wait for the message to clear.
Wait for the message to clear and the printer to reset.
NOTE: Do not turn the printer off while this message is displayed.
Wait for the message to clear.
NOTE: Do not turn the printer off while this message is displayed.
Send a job to print.
Turn the printer off and back on.
l
If the error recurs, turn the printer off, unplug the power cord from the wall outlet, and remove the
¡
specified bin, then reattach the bin to the printer, reconnect the power cord to a properly grounded
outlet, and then restart the printer.
If the error recurs, turn the printer off, unplug the power cord from the wall outlet, and remove the
¡
specified device, and call for service.
Press the Select button
l
to clear the message and continue printing.
to clear the message and continue printing.
to ignore the manual feed request and print on paper already installed in one of
to warm the printer to normal operating temperature and display the Ready
to clear the message and print without using the specified bin.