d. Enter the path to the correct CA certificate, or click Browse to select the certificate. Click OK to install the certificate, or click Cancel to cancel the

action.

e. Click OK to return to the Advanced Mode home screen, and continue with

If EAP-TLS is selected as the authentication mechanism:

a. Enter an appropriate username for the 802.1x — RADIUS authentication server.

b. Click Install Signed Certificate.

c. Enter the path to the correct signed certificate, or click Browse to select the certificate. Click OK to install the certificate, or click Cancel to cancel

the action.

d. Click Install CA Certificate.

e. Enter the path to the correct CA certificate, or click Browse to select the certificate. Click OK to install the certificate, or click Cancel to cancel the

action.

f. Click OK to return to the Advanced Mode home screen, and continue with

If EAP-TTLS is selected as the authentication mechanism:

a. Select the appropriate Inner Authentication to be used in conjunction with EAP-TTLS.

b. Enter an appropriate username and password for the 802.1x — RADIUS authentication server.

c. Confirm the password.

d. Click Install CA Certificate.

e. Enter the path to the correct CA certificate, or click Browse to select the certificate. Click OK to install the certificate, or click Cancel to exit the

certificate dialog.

f. Click OK to return to the Advanced Mode home screen, and continue with

Configuring WEP Encryption

1. Enter the appropriate WEP key(s). WEP encryption requires at least one WEP key, but can include up to four.

2. Select the default WEP transmit key.

3. Click OK to return to the Advanced Mode home screen, and proceed to

Configuring WPA Personal Encryption

1. Enter the appropriate Pre-Shared key.

2. Click OK to return to the Advanced Mode home screen, and proceed to

Creating a Certificate Request

Some authentication mechanisms require certificates to work properly. In situations in which a signed certificate is required, a certificate request must be

initiated in order to create a new signed certificate.

To create a certificate request

1. Go to Certificates® Create Certificate Request.

2. Enter the appropriate certificate information.

3. Click Browse to navigate to the location where the certificate is to be saved.

4. Click OK to return to the Advanced Mode home screen, and proceed to

Installing the Printer on the Network

Once the print server has been configured, the Wireless Setup Utility will return to the initial Drivers and Utilities CD screen. Click Network Installation —

Install the printer for use on a network. For more information, see

Installing a Network Printer on Additional Network Computers

If you are installing the network printer for use with multiple computers on the network, repeat the

computer that will have access to the printer. The wireless print server does not need to be reconfigured for each successive installation.

Changing the Wireless Print Server Settings

step 6