This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for information technology equipment. If this

equipment is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to

the instruction manual.

VCCI Class B ITE Regulatory Mark

If the regulatory label includes the following marking, your device is a Class B product:

Polish Center for Testing and Certification Notice

The equipment should draw power from a socket with an attached protection circuit (a 3-prong socket). All equipment that works together (computer, monitor,

printer, and so on) should have the same power supply source.

The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no

larger than 16 amperes (A).

To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment

and easily accessible.

A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standard PN-EN 55022.