Dell 5210n Mono Laser Printer User Manual page 68

51 Defective flash detected
52 Not enough free space in flash
memory for resources
53 Unformatted flash detected
54 Network <x> software error
54 Standard network software error
55 Unsupported option in slot <x>
56 Parallel port <x> disabled
56 Standard parallel port disabled
56 USB port <x> disabled
56 Standard USB port disabled
58 Too many flash options installed
58 Too many bins attached
58 Too many trays attached
59 Incompatible duplex
59 Incompatible envelope feeder
59 Incompatible output bin <x>
59 Incompatible tray <x>
80 Scheduled maintenance advised
Press the Select button to clear the message and continue printing.
You must install different flash memory before you can download any resources to flash. For more information, see
Installing Printer Memory.
Press the Select button
l
Downloaded fonts and macros not previously stored in flash memory are deleted.
Delete fonts, macros, and other data stored on the flash memory.
l
Install a larger capacity flash memory card. For more information, see
l
Press the Select button to clear the message and continue printing.
You must format the flash memory before you can store any resources on it. If the error message remains, the flash
memory may be defective and require replacing.
Press the Select button
l
The job may not print correctly.
Program new firmware for the network interface.
l
Reset the printer.
l
1. Turn the printer off.
2. Unplug the power cord from the wall outlet.
3. Remove the unsupported option.
4. Connect the power cord to a properly grounded outlet.
5. Turn the printer on.
Press the Select button
l
The printer discards any data received through the parallel port.
Make sure the Parallel Buffer menu item is not set to Disabled.
l
Press the Select button
l
The printer discards any data received through the USB port.
Make sure the USB Buffer menu item is not set to Disabled.
l
Press the Select button
l
The printer discards any data received through the USB port.
Make sure the USB Buffer menu item is not set to Disabled.
l
1. Turn off and unplug the printer.
2. Remove the excess flash memory.
3. Plug in the printer, and turn it on.
1. Turn off and unplug the printer.
2. Remove the additional bins.
3. Plug in the printer, and turn it on.
1. Turn off and unplug the printer.
2. Remove the additional drawers.
3. Plug in the printer, and turn it on.
Remove the duplex unit.
l
Press the Select button
l
Remove the envelope feeder.
l
Press the Select button
l
Remove the output bin.
l
Press the Select button
l
Remove the specified tray.
l
Press the Select button
l
Press the Select button
l
Replace the maintenance items and if necessary, reset the printer maintenance counter. For more
l
information, see Replacing Maintenance Kit
to clear the message and continue printing.
to clear the message and continue printing.
to clear the message.
to clear the message.
to clear the message.
to clear the message and continue printing without using the duplex unit.
to clear the message and continue printing without using the envelope feeder.
to clear the message and continue printing without using the specified output bin.
to clear the message and continue printing without using the specified tray.
to clear the message, and continue printing.
Items.
Installing Printer Memory.