Tv Components; Package Contents; Front; Back And Side - Dynex DX-32E250A12 User Manual

TV components

TV components

Package contents

Remote control and batteries (2 AAA)
Stand with screws
Composite cable
Quick Setup Guide

Front

# Item Description
Press to increase or decrease the volume.
1
VOL+/VOL–
Press to go to the next or previous channel in the
2 channel list. For more information, see "Selecting a
CH /CH
channel" on page 19.
Press to open the on-screen menu. For more
3
MENU
information, see "Navigating the menus" on page 19.
Press to open the Input Source list, then press
to select a video input source.
4
INPUT
In menu mode, press to confirm selections.
Press to turn your TV on or off (Standby mode). When
5
your TV is off, power still flows into it. To disconnect
(power)
power, unplug the power cord.

Back and Side

# Item
1 Service port
2
COMPONENT L/R audio
3
COMPONENT Y/P
HDMI 1/DVI
4
HDMI 2
5
PC/DVI AUDIO IN
6
VGA
or
7
ANT/CABLE
8
DIGITAL OUTPUT
9
AUDIO OUT
DX-32E250A12
Description
For software update only. Do not use.
Connect the audio for a component video device to
these jacks. For more information, see "Using
component video (better)" on pages 9 or 12.
Connect the video for a component video device to
these jacks. Connect the video cable from a composite
video device to the "Y" jack. For more information, see
/P
B R
"Using component video (better)" on pages 9 or 12.
Note: The composite video jack shares the audio jacks
with the Y/PB/PR (component video) jacks.
Connect HDMI devices to these jacks. An HDMI cable
carries both video and sound. You do not need to make
an audio connection for an HDMI device.
For more information, see "Using HDMI (best)" on
pages 8, 11, or 14.
When connecting a DVI device using an HDMI-DVI
adapter, connect the device to the HDMI1 jack.
Connect the audio for a computer or a DVI device to
this jack. For more information, see "Using VGA" on
page 14 or "Using DVI (same as HDMI but requires a
sound connection)" on pages 8 or 11.
Connect the video (VGA) for a computer to this jack.
For more information, see "Using VGA" on page 14.
Connect an antenna or cable TV to this jack. For more
information, see "Connecting an antenna or cable TV
(no box)" on page 10.
Connect an audio amplifier to this jack. For more
information, see "Using digital audio" on page 15.
Connect an external sound system to this jack. For
more information, see "Using analog audio" on
page 15.
5